Nudging Your Song: Pickups, Count-Ins and Moving a Track

Click a song's waveform and press the arrow keys to move the whole song a beat or a bar against the bar lines, for a pickup or a count-in. Click one track's waveform to move just that track. Every nudge has Undo and its own History entry.

Your song's timeline starts at the top of its stems, and the bar lines start there too. To line up a pickup or add a count-in bar, nudge the whole song: click its waveform, then press an arrow key or drag. It works like Ableton Live: the bar lines and the click stay where they are, and the music slides along them. If only one track is out of time, you can nudge just that track.

Before you start

  • The song must be saved on the timeline. Almost every song is. To check, open the song's History and look for Saved on the timeline. A song that wasn't converted says why on its page.
  • You need permission to edit the band's songs. View-only members can play the song but can't nudge it.
  • Nudging works for every band. There's nothing to switch on, and you don't need Edit mode.

Select the song

  1. Open the song.
  2. Click the song's waveform. It gets a blue outline, and a hint shows the keys: ← → beat · ⇧ ← → bar · or drag.

To let go of the selection, press Esc or click anywhere else.

Nudge it

Press What it does
→ Moves the song one beat later
← Moves the song one beat earlier
⇧ → Moves the song one bar later
⇧ ← Moves the song one bar earlier

You can also drag the selected song left or right. It snaps to beats; hold ⇧ while you drag to snap to bars. While you drag, a preview shows where the song will land.

Each nudge moves the song by whole beats or whole bars. There's no smaller step. A bar is counted in the song's opening time signature, so in 4/4 one bar is four beats.

What moves, and what stays put

The bar lines and the click stay where they are. The music moves, and everything that belongs to the music moves with it by the same amount:

  • every stem
  • sections
  • lyrics and chords
  • cues and MIDI cues
  • mix automation
  • tempo changes and time-signature changes

So nothing comes apart: every section, lyric and cue stays on the music it belongs to. When you move the song later, empty beats open up in front of the music, and the click plays through them.

Fix a song that starts on a pickup

If your stems start partway through a bar, the click's accent won't land on the music's downbeat. Move the song later until the downbeat sits on a bar line.

For example, if the stems start on beat 3 (the first downbeat in the music comes two beats in):

  1. Click the song's waveform to select it.
  2. Press → twice.
  3. Play it from the top. The music's downbeat now lands on a bar line, and the click accents it.

If the pickup is a different length, press → once for each beat until the downbeat lines up.

Add a count-in bar

  1. Click the song's waveform to select it.
  2. Press ⇧ →. The song moves one bar later, and the click plays one bar on its own before the music.
  3. For a longer count-in, press ⇧ → again for each extra bar.

Undo a nudge

  • Straight away: click Undo on the badge on the waveform (for example Moved +1 bar).
  • Later, even after a reload: each nudge is one entry in the song's History, named for the move (for example Moved the song … later). Open History, find the entry from before the nudge, and restore it.

Nudging back the other way also puts the song back exactly where it was.

Nudging one track

If one track is out of time with the others, for example a part that sits a beat late, move just that track.

  1. In the track list, click that track's waveform. It gets a blue outline. Only one thing is selected at a time, so selecting a track lets go of the song, and selecting the song lets go of the track.
  2. Press → / ← to move the track a beat, or ⇧ → / ⇧ ← to move it a bar. You can also drag it: it snaps to beats, and to bars with ⇧ held.
  3. Press Esc to let go.

Only that track moves, and its volume automation moves with it. The bar lines, the click, the other tracks, sections, lyrics, chords, cues and MIDI cues all stay put.

Each track nudge is one entry in the song's History, named for the track (for example Moved "Keys" 1 beat later), and a badge on the track's lane has Undo.

Good to know:

  • Moving a track earlier than the start of the song trims it. The part that would fall before the start is cut off, and Pliris tells you how much. Your audio file isn't changed: click Undo to bring it back.
  • A track warped in Ableton can't be nudged where the tempo changes under it. Pliris says so and suggests you nudge it in Ableton. Make the move in Live, then drop the set back on the song.
  • If Pliris can't move a track, it says why and nothing changes.

When a nudge is refused

Some nudges can't be made. Nothing changes, and Pliris tells you why. The common ones:

  • A time-signature change would land off a bar line. If your song changes time signature partway through, moving it by a single beat could put that change in the middle of a bar. The song can still move by whole bars: use ⇧ → or ⇧ ←.
  • There isn't room to move earlier. The song can only move earlier into the empty space in front of the music. The message says how far it can go. MIDI cues and a reference recording are checked too.
  • A tempo or time-signature change would land on the very first beat and replace the song's opening one.

Nudging and Ableton Live

When you download the song to Ableton, it sits on Live's timeline exactly as it does in Pliris, empty bars in front included. If you export a song to Ableton and drop the set back without changing anything, the song stays as it was. See Exporting Your Show Back to Ableton.

Nudging and timecode

Timecode starts where the song's timeline starts, and the timeline doesn't move. So when you nudge a song later, its music plays that much later against its timecode. MIDI cues you programmed in Pliris move with the music. Cues stored on a lighting console or media server against a timecode value don't, so check them before your next show.

Frequently asked questions

How do I fix a song that starts on a pickup?

Click the song's waveform to select it, then press → once for each beat until the music's downbeat sits on a bar line. If the stems start on beat 3, press → twice. The bar lines and the click stay put, and the music slides along them, so the click's accent lands on the downbeat.

How do I add a count-in bar?

Click the song's waveform to select it and press ⇧ →. The song moves one bar later, and the click plays that bar on its own before the music. Press ⇧ → again for each extra bar.

Why won't my song move by one beat?

Most likely your song changes time signature partway through, and moving it by one beat would put that change in the middle of a bar. Pliris refuses the nudge and says so. Move it by whole bars instead with ⇧ → or ⇧ ←.

Why can't I move my song earlier?

A song can only move earlier into the empty space in front of its music. If the stems start right at the beginning of the timeline, there's nowhere earlier to go. The message tells you how far the song can move.

Do my lyrics, cues and tempo changes move when I nudge?

Yes. A song nudge moves everything that belongs to the music by the same amount: stems, sections, lyrics, chords, cues, MIDI cues, mix automation, and tempo and time-signature changes. Only the bar lines and the click stay put. Cues stored outside Pliris against a timecode value don't move, so check those on your console.

How do I move just one track?

Click that track's waveform in the track list, then press → / ← for a beat or ⇧ → / ⇧ ← for a bar, or drag it. Only that track and its volume automation move. Everything else, including the click and your sections, stays where it is.

Why was the start of my track cut off after I nudged it?

You moved the track earlier than the start of the song, so the part before the start was trimmed. The audio file is untouched: click Undo on the track's badge, or restore the entry from before the nudge in History, to bring it back.

Why can't I nudge a track that was warped in Ableton?

The tempo changes where that track plays, and Pliris can't yet move warped audio across a tempo change. Nudge the track in Ableton, then drop the set back on the song.

How do I undo a nudge?

Click Undo on the badge. Each nudge is also one entry in the song's History, so you can restore the version from before any nudge later, even after you reload the page.

Can I move a song or a track by less than a beat?

No. A nudge moves by whole beats or whole bars.

Where is the downbeat marker?

There isn't one. The song's timeline starts at the top of its stems, and so does the grid. To line the music up with the bar lines, nudge the song.

Can I nudge a song that wasn't converted?

No. Nudging works on songs saved on the timeline. A song that wasn't converted says why on its page.

Who can nudge a song?

Anyone in the band who can edit songs.

Where to go next

Stuck at any point, click the support bubble in the bottom-right corner of any page, or email support@fromstudiotostage.com.